Thanks Kanger!

Thanks for replacement glass. I manhandled my subtank changing the orings lol.  


Similar Content



Orings

My favorite drip tip has a busted o ring and the other one on it is not fairing so well either. It is one from Suicide Bunny and i have taken some orings off other drip tips and they did not work out so well. I am also a big erkronogin used and those two small o rings on the top disappear very fast. I know those are 3x1 but that does not tell me in ID. Does anyone have a good place to get replacement Orings at? I have looked all over the place and since i am not really sure what i am getting i dont want to have a million orings around. Now i did find an oring set on ebay for about 13 and was thinking about picking that up. It says it has the 3x1 in there.  

Kanger Subtankmin Question

Just a quick question about the kanger subtank mini
Which airhole do most people use I keep changing mine thru the day
just wondering BTW great tank I use the rba piece all the time  

Gluing Glass To Metal. First Gen Kanger Protank.

I figured this would be the Second best place to put this question but the other forum doesn't produce any replies. So I posted it here. Simple answer if you know what to use to glue glass to metal and will be non toxic!

On to the question, I have a first generation Kanger Protank where the body, glass bit, is glued to the bottom metal piece that screws into the Skirted piece of an eGo battery adaptor. One friend was using the glass piece to screw the Protank onto and off of her mod and to refill the ejuice. Short story shorter she popped the glass piece of the first gen Protank.

Big question part, what type of adhesive should I use to "GLUE" the Glass to the bottom metal Piece. Something that is non toxic and will survive the repeated stresses of day to day use that a Protank would encounter?

Thank you for your understanding, Moderator's, the Cross Post.  

Mvp 3.0 And Kanger Subtank ( 1.2 Ohm Occ ) Not Working

So i had mvp 20w, and the kanger subtank worked fine with 1.2ohm occ at 11-12w.

Just put it on the mvp 3.0 and does not fire. Does not detect ohm ( blinks like this "-.-")

what gives? I tried with kanger pro tank 1.8ohm coil and it works great.  

Confused On Kanger Coils

Ok so I know that kanger subtank .5 ohm coils are good for up to like fifty watts and the subtank 1.2 coils are good for up to 26 watts, my question is this kanger has released vocc coils pretty much the same coils they have for the aero tank , genitank ,etc except now they have organic cotton like the subtank coils. Is it safe to think that the 1,2 and 1.5 ohm vocc coils will be safe as the 1.2 and 1.5 subtank coils at the 26 or so watt range, if not how many watts are safe so I don't burn them to hell  

Measuring And Buying Orings

I need orings as my Crown 2 tank is leaking. I have a digital caliper but I am wondering how do you measure them without distorting the perfect circle? Also since they are worn the size will be off a little. How do you compensate for that?

Also wheres the best place to order and what material like silicone is best?
Thanks  

Evic Vt

So I was originaly going to buy an istick 50w with a kanger subtank buy I bought the Evic VT in racing yellow. It's on it's way in the mail. Was this a bad idea? Also should I just stick with the tank it comes with or should I buy a kanger subtank. My goal is big clouds and nice flavor!  

Changing Coil Vs. Changing Cotton

I can't find the post, but someone recently posted a helpful YouTube video on how to change cotton in a Kanger Subtank coil. I had no idea it was so easy, and I'm going to try it on my old coils. I've saved the video for future reference. My question is: how do you know when you need to change the cotton vs. when you need to change the entire coil? I don't think I'm up to doing my own coils yet. Is changing cotton just a way to prolong their life a little longer, and do you get to a point when you have to redo the whole shebang? Also, does any cotton from a vape store work, or do you need a specific kind depending on what kind of coil you have?  

Kanger Subtank Mini Spitting Juice Please Help

Hi, I have having issues with the kanger subtank mini sucking hot juice into my mouth with the rba deck it doesn't happen with the occ coils please help....  

New Kanger Box Mod- The Subox

IT'S HERE! For all those who wanted a box with extra features that the Kbox just didn't have. And a new color variation for the subtank line. No specs yet, just the initial heads up from Kanger that this is a thing, and it is SO very real.
Brought to you by a Kanger fangirl.