New Setup... Upgrade From Ce4 Blister Kit?

I drip, I sub ohm tanks, etc. I've been running most of my RDAs & tanks on the Istick 50 & it's great (actually thinking of buying another).
But, now I'm wanting to buy an Arctic tank (I love a warm Vape, good flavor & chuck Vape). I was told that I need a mod that not only could push 70+watts, but 1 that has temp control. Should I buy the Cloupor T8 or are there other options I might like? Any help & suggestions would be greatly appreciated.  

I have had my istick 50w for about 24 hours now. I the issue I am having is that all my 1.8ohm tanks are reading 2.0ohms on the display of the iStick. This is the case for my Aspire ET-S and Nautilus Minis. On two occasions the Nautilus tanks have read 1.9. Never 1.8. Even with brand new coils. I get the same result on 4 Nautilus Minis and 3 ET-S tanks. I get the same results with the mod turned off when I screw on the tanks as I do with the mod turned on. Any ideas or suggestions?  

Hello. I'm currently using an Eleaf iTwist Mega with a Tabac BCC clearomizer and using Kanger T3 2.2 or 2.5 ohms resistances. I used an Evic mod before but it broke.
Basically a lot of times I use this setup I get the gurgling sounds and also the airflow holes must be cleaned often.
I'm thinking of upgrading and here's some of my vaping preferences: main thing - strong TH. I prefer the mouth-to-lung vaping technique. The more vapor the better. Also, prefer using tanks that are not using dripping technique (so I must change the liquid very fast).
I went to a store and the guy there really recommended the Eleaf 50W mod, however, from what I've read from some posts, not a lot of people vape at that high of a power anyways, so there could be the Eleaf 30W or 20W options then(?) - basically if the mod can last a full day I'm good with that.
As for the clearomizer/atomizer I'm not sure which to choose. I see the eLeaf Mega being recommended, the Nautilus as well - but which one can support the best resistances?
Also, not sure about the value of resistances I should use after the upgrade: can the non-drip tanks handle sub-ohm? Is it worth it if they do? Thanks.  

Hey guys looking for a tank that will last me long. As we all know CE4's aren't the best mine died pretty quickly. Looking for a tank that will last me long, and wouldn't need replacement coils very often. Also hoping these tanks are glass so they don't break with certain juice. I was thinking the evod glass 2 or the aspire k1. Any ideas? And will these tanks fit on my battery?

Zen Pen Electronic Cigarette Kit  

Hey - vaped for a LONG time. Mostly MTL tanks and I have been using the Zenith for a couple of years which I really like, but I'm too hard on it. I vape too much. Anyway, I've started using thicker liquids 70/30 and it's even more difficult for my Zenith. I do thin it out with a little menthol drops. But here's my question. I've been pondering going to a sub ohm tank but I just really don't know which to choose. As it stands, I'm thinking the falcon 2? Do their coils last long? Do the tanks leak even if liquid is thinned out a bit (not much). Anyway, if anyone has any recommendations, plz post reply. Thanks  

Hi everybody, I have lost track of new vaping gear and need an advice.
Finally one of my mods died. The newest one, Joyetech eVic Primo. Bad from the beginning (because of its faulty protection) it just stopped working. Another mod should die soon. It is a clone of iStick 30, 4+ years old. It's my best mode, but its battery already is at about of half capacity (after about 1500 charges).
So, now I use iStick 30, iStick Pico 25 and iStick Pico. Tanks (from best to worst) Kayfun 5, Siren 2, Ammit, OBS Engine NANO.
I need a new mod and, possibly, a new tank.
Thanks for reading.  

I currently use a Nautilus for work or driving and I break out the rdas for kicking back or having fun. Well my friends, it's upgrade time. Too many tanks and my head is spinning. I'm a fan of Aspire but the Subtank Plus has my interest. I would love to hear what everyone thinks, especially pros and cons from owners of said tanks. Advance thanks.  

So I pulled the trigger and decided to upgrade my istick 20w and get the istick 50w.
Came fully charged so threw on my nautilus and started vaping and I have to draw really hard to get some vapor. I've tried different wattages from 7-18 and the results are still low vapor. Not no vapor but not as much as I should be getting. So I thought it was a bad coil or atty so I threw the same tank onto my istick 20w and worked perfectly with a ton of vapor.
Threw it back on the 50 and made sure the counter was counting and took a vape for 7 seconds with about half the vapor from the 20w.
Am I doing something wrong?
thanks
Brian  

Finally! I've tried so many sub ohm tanks with a shelf of them to prove it along with box mods and I've found my perfect set up that I'm 100 percent happy with. That urge of "must have more" and "must have the latest and greatest" has finally subsided after 100s of dollars spent. I can finally relax on hardware and focus on enjoying good juices. I still stay up on new tech but I'm finally happy on my go to juice vendor and hardware. Oh what a good feeling!

My goto set up: Atlantis V1 with cotton coils and 5ml upgrade and ipv mini 2 at 32 watts. Any higher then 32 and the vape is too warm to enjoy. To justify this, I personally own the following:

Atlantis V2
Subtank
Subtank mini using both Occ and rba
Delta I I using both coil and rba
Lemo
Lemo 2
Arctic tank
Starre tank
Herakles tank
Kayfun
Kay fun v4

Ipv mini 1
Istick 30
Istick 20
M50 with 65w upgrade

My go to juices are all from itcvapes. 20$ for 120ml for the win.

Time to sell off old items or give them to friends to help them quit smoking.

FYI I'm so busy that rebuilding isn't an option for me. It's much Cheaper, and I have a ton of kanthal in different gauges with a big bag of Koh Gen do, but I'd rather pay for convenience of coils.

Wonderful feeling!  

Hello everyone!

I have been an happy vaper now for 5 years. Like most of the old beginners I started with cartridges, blue foam, cartomizer and so on. Currently I am using Kanger tanks, T3, Evod 2, MiniProtank and Aspire ET-S BVC, with Vision Spinner VV but I am looking for an upgrade.
I am not looking for an RDA, nor big battery and definitively not sub-ohms. I'm looking more for a glass tank, adjustable airflow, large capacity, and the ability to see the liquid.
Thank you you all so much for any advice, and happy vaping!