Average Life Of Kanger Temp Control Coils

Hello everyone, I feel like I should post this in the Beginner's Thread. I bought an IPV4 today and it is my first temp control, non-built-in battery mod. I need help! LOL like with everything. I tell you my gear. The IPV4 of course, a Nitecore D2 charger, a pair of Imeren 18650 batteries, 5 Kanger OCC nickel coils and 2 .3 Atlantis coils. Along with an Atlantis V1 and pair of Kanger subtanks. Now I know, some of you are probably thinking people like me shouldn't have temp control but please humor me I want to learn.
Basically my first question is where do I start? How do I get to temp control on this mod? Where should I set it for these Nickel coils? Should I leave it at the same setting for regular coils? How do I get to joules? Where should I set those? Ok, let's just start with that. Is there a place online I can get a tutorial?
Sorry to be like a kid trying to learn to ride a bike, but as anyone that owns one of these things knows, the instructions don't say much. Thank you all for any help given, I know there are some real pros here.  

I was strolling through sweet vapes website and seen they had these Atlantis coils made by aspire.I plan on ordering a temp control mod this week and wanted some nickel coils to go with it I have the maganus/starre tank...well I seen that the vapor shark nickel coils are twice the price so I was wondering if any one had any experience with these. I heard the Atlantis coils would fit in the Maganus but didn't know if these would and I see the vapor sharks ni200 coils are 0.15 and the vapeonly coils are 0.25 would that be noticeable or have any effect such as having to use more watts or temperature? Here's a link VapeOnly vAir-T Atlantis Nickel OCC - Aspire Coils - Aspire - Clearomizers Tanks  

I have an MFeng UX that have temp control built into it and I have a crown iv tank that has stainless steel coils with it out of the box. I tried the tank on an IStixking 530 mod with coil set to stainless, I tried a tcr of 0.000093(I think?) And kept the temp below 400. The Sticking said no juice detected, I looked it up, some people were able to use nickel and it work good. The coil died fast, and I wanna learn how to use temp control without ruining the other coil. Basically, I wanna use it on my mfeng, and not guess at what settings lol. Any advice?  

how important is it to have temp control? I'm looking for my next mod and was wondering if it's a must have. I'm a tootle puffer btw. Also to you HAVE to use a tank w nickel or titanium coils?
Tx  

This mod company claims temp control with any kind of wire ! I don't know about the rest of you but i think this would be pretty awesome if it works, what do you guys and gals think? Also it seems to monitor juice level and will flash a reminder to refill juice.




Asolo Specification:

1. The mod can support almost all tanks from 0.08ohm~2.5ohm.

Remarks:
It can support 0.05ohm but we are not recommend you to do it because it may be dangerous.
2. It is various device from 5w~200w
3. Heating coil material: KANTHAL A1, Titanium (Ti), Nickel (Ni200), other normal materials for wire

Asolo 200W_Shenzhen IJOY Technology Co.，Ltd. - Ijoy e-cigarette/Most electronic cigarette manufacturer innovation  

I've been tempted by temp control. I am an avid mech user. I love my REO. I love my SMPL. I love my G-box. I have a 40w VF clone (no temp control), but I haven't been using it that much. My local B&M now sells The VaporShark rDNA40, but is temp control really worth it? I've been having a heluva time with my subtanks - they always taste burnt now even at low wattage. Would the nickel be any better?
The other thing is, if it's worth it, do I replace the chip in my VF with a real chip with the temp control (I really stink at soldering) or just say to heck with it and get a Shark?
Need input...lots of input. lol


Sent from my iPhone using Tapatalk  

So I'm looking into buying a temp controlled mod for my next purchase. Ideally, I would be getting the VaporFlask with the DNA40 board. Problem is, I dont have $300 usd to drop on it. Sooo....

I was thinking about the FT clone, and was about 3 clicks away from making the purchase when a friend tells me about the IPV4 pre-order over on the bay. The DNA40 has temp control and goes up to 40 watts (duh) but from what I have read, the IPV4 also has temp control and goes up to 100 watts. I'll never use all 100 watts BUT sometimes will vape above 40 watts. I like that both are dual 18650 and have the temp control function (I'm dying to play with some nickel wire) I'd really like some opinions

Any thoughts on the VaporFlask clones from FT? Would it be worth it for me to wait for the IPV4?

Cheers ECF!  

Hey folks,

Have been getting into vaping on temp control (DNA40) devices with Nickel Wire builds in RDAs. Does anyone have experience with cleaning these builds to extend life? You can't dry-burn Nickel Wire the way you can Kanthal so I haven't figured out a way to clean these builds other than rinsing as well as possible and rewicking.

Hate the idea of having to rebuild every time but if that is what needs to happen I'll do it.  

So while home sick (yes I was actually sick) today, several reviews sold me on the SMOK TCT pro as THE tank for my IPv4. I was looking for a high watt tank that could also make use of temp control. Didn't want another Atlantis and the Kanger subtank is good but it's just not quite enough for me in temp control mode. Anyone have any experience with the SMOK TCT or VCT pro tanks? Please share!  

So I am considering picking up a temp control mod and venturing into that side of vaping. I have been eying the sx mini but that price tag...whew. I've also heard sigelei will be releasing a 75w temp control model soon for half the price. has anyone used or own an sx mini? Is it worth the price tag or are there other mods out there better? I do not want the ipv4, I'm just not a fan of that mod. Suggestions?