I'm Using Blu Plus Pack But I Have A Trouble

i want to buy a new battery but i'm living in korea.
so i decided don't purchase blu battery because it process is rather complicate ,
even i don't want to suffer it again.
anyway fortunately, i found few 510 mini battery on korea ecig webshop.
here is my question
if i buy a new battery then it could be charged in the pack?(charge seat for blu battery)  


Similar Content



Charging An Ipv Mini

Can I use an external battery pack to charge an IPV Mini?

I have a 10,000mAh external battery to charge my cell phone (Note 4, with a 3500mAh battery), which has 2 options for charging: 1.5v=1A and 2.5v=2.1A.

Is it recommended? Is it safe? Are there any precautions I need to take if I use the battery pack?

I haven't gotten around to getting an extra 18650 battery (and charger) for the IPV Mini. I've finally realized that it takes maybe 2-3 hours to charge the battery via the USB cable. But the one battery doesn't quite last me all day, depending on how heavy I'm using the Mini.

I usually carry a Volcano Inferno once the Mini dies, but the Volcano really sucks in comparison to the Mini. I'd love to be able to charge the Mini while I'm out and about.

I've added a pic of the external battery for specific information.


Thanks for all your help.  

Xtar Vc2s Charger Question

Hey guys,

I finally updated my charger a few days ago (I think before I had the VP2) or something like that. Quick question on something I'm noticing that seems a bit odd to me.

When I charge (for example 18650's), a battery that's fully charged in channel 1...it flashes FULL/0.00 mA, I remove the battery. A few minutes later, I'll put the battery back in the same bay, and all of a sudden there are a few hundred mA's that show up on the screen that need to be charged back into the battery and it takes a few minutes for channel 1 to recognize the battery is fully charged and flash FULL/0.00mA again (although it does show above that's fully charged at 4.2v).

If I take that same battery and do the same test but this time in channel 2, within a few seconds it recognizes that the battery is fully charged and flashes FULL/0.00mA. So it seems channel 1 is not working as well as channel 2 is, when it comes to recognizing information from the battery.

Is this normal for this charger or do I have a defective charger?  

Wismec Luxotic Surface Battery Low Issue

I got a problem with my Luxotic Surface. I'm using a LG Choco Battery 18650, it was fully charged and when I press the fire button suddenly it appears for Battery Low even the battery was on fully charged. I tried my spare battery maybe its just a mistake putting a fully charge battery, but it was the same issue also with the spare battery. I tried the 2 batteries with my Geek Vape Aegis 100W to check whether my batteries are already broke but it works fine. I was vaping for my Luxotic Surface by 55.0 Wattage, 0.21 ohms, 3.40 Voltage. Can someone help me out to fix this problem?  

When To Charge 21700 Battery?

Hi

I'm using Samsung 21700 T40 batteries.
Trying to figure out..
Is it best to charge a battery when it's discharged or nearly discharged?

I like to keep things simple with a routine of charging once a day, but then the battery will be set to charge even when there's 15-30% power left.

Is that bad for the battery?  

Vape Battery Not Working

Hi,

I bought a new vape cartridge but it won’t work with the battery I have. The battery is charged and just flashes blue when it’s screwed in and pressed.

Do I need to buy a new battery?
Any info would be awesome. You can see the battery and cartridge in the photos.  

Chargeable Apv Vs Battery Apv

Hi I was interested in buying my next Vapor Mod and am a little torn on what direction to go. A chargeable mod or one that holds a battery such as an 18650. The Mods I think I've narrowed it down to are these 3:
iStick 50w , MVP 3 , or IPV Mini 2 70w

Can anyone help tell me what the benefits of a mod that holds a battery are? I currently have an iStick and like how I can just plug it in and charge it up. Do you lose vapor production as a removable battery mod loses its charge? What are the benefits and cons of each? What one should I choose?

Thank you guys always  

Another Question About Batteries.

Now that I have gotten into unregulated mods I've been doing a lot of reading about batteries... well actually I had started reading before but now that I am actually using them I want to know more.

One thing I am a little puzzled about is that you should recharge a battery when it's about 2/3 discharged and you should never charge a battery that is completely discharged. My questions:

1. How do I know the level of discharge in my battery? - I don't own a multi meter
2. What do you do with a fully discharged battery? - just chuck it?  

21700 Mods

I am looking for a dual 21700 mod. The available ones, I probably will buy but, there aren't many to choose from. There are several single 21700 mods. My question is how long (on average) will a single battery mod charge last (I know this question is subjective). I vape around 65 watts, most of the ones I have seen online are rated 100 watts. I do not want to leave home and my mod die out because it was a single battery mod. I know I could carry a spare charged battery around, I just do not want to have to. Thanks  

Best Battery For This And Where To Buy?

hi guys im ordering this kit SUBOX Mini by Kanger (black) | ECIG CITY and id like to know which is the best battery for it and where can i buy it?

thanks  

Ego One Battery

Is the joytech eGo One battery considered a MOD battery? I was thinking about getting a 1100mah with the Nautilus mini tank but afraid It's too big. And does anyone know If the eGo One has a variable voltage?